Every piece of roof data for one address. One $10 PDF.
A roof data report compiles every piece of property data a contractor or estimator needs in one PDF: total squares, predominant and per-facet pitch, linear footage of ridge / hip / valley / eave / rake, 5-year NOAA hail and wind history at the exact address, adopted local building code and amendments, and waste-factor calculation. RoofGenius generates the full report from a satellite image in under five minutes for $10.
What's inside a roof data report
Total squares, predominant pitch, per-facet pitch, ridge / hip / valley / eave / rake linear footage, waste calculation.
Address verification, building footprint, structure count, lot data, satellite imagery date.
Adopted IRC version, ASCE 7 wind speed design, jurisdiction amendments, code-upgrade items required for re-roof.
Every NOAA hail event with stone size, every high-wind event with speed, dates within 1 mile of the address.
Why combined roof data wins on insurance work
On an insurance supplement, the desk adjuster wants three things from the contractor: verified measurements, photo or imagery evidence of damage, and the local code section that justifies any upgrade line items. A measurement-only report gives them one of those three. A full roof data report gives them all three in the same PDF — measurements, storm history (date the damage), and code citations (justify O&L).
For retail sales, the same report doubles as a one-page sales sheet — homeowners are more likely to sign when the proposal references their actual hail event date and the code-required upgrades from their jurisdiction.
Frequently asked questions
What is a roof data report?+
A roof data report is a consolidated PDF combining roof measurements (squares, pitch, ridge / hip / valley), property data (building footprint, structure count), local building code (adopted IRC version, wind speed design), and 5-year NOAA storm history (hail size, wind speed, event dates) for a specific address.
What's the difference between a roof measurement report and a roof data report?+
A measurement report covers geometry only — squares, pitch, linear footage. A full roof data report adds property data, adopted building code, and storm history. The data report is more useful for insurance supplements, code-upgrade reimbursement, and storm-restoration sales.
How much does a roof data report cost?+
A full RoofGenius roof data report is $10 per address — or $0–$9 per report on subscription plans. Competing 'measurement-only' reports run $19–$95 and typically don't bundle storm history or local code data.
Where does the storm history data come from?+
Storm history is sourced from NOAA Storm Events Database and SPC reports, geocoded to the exact property coordinates. Reports include every recorded hail event (with stone size) and high-wind event (with measured or estimated speed) within a 1-mile radius over the past 5 years.
Is the building-code data accurate?+
Code data comes from the jurisdiction's most recently adopted International Residential Code (IRC) version plus any local amendments. Wind speed design values (e.g. 115 mph Risk Cat II in Dallas) are pulled from ASCE 7. The report cites the adopting ordinance for use in O&L supplements.